11-16-2021 04:34 AM
Hi, I have a customer who was a PA-850 firewall. There connection to their LAN is currently using a 1Gb Ethernet port (Port 4). They are in the process of upgrading the network backbone to be 10Gb and wanted to change their connection to the Firewall to 10Gb too. Is there any easy way to migrate all of the settings they have setup from port 4 to port 9 of the firewall.
11-16-2021 01:07 PM
Hello,
Put the SPF interface into the same zone as the 1GB interface. Then setup all the same features and settings on the day of the cutover. then remove the IP settings on the old interface.
Hope this helps.
11-16-2021 05:11 PM
Alternatively to what @OtakarKlier mentioned, you can also simply export the XML configuration file and modify references to ethernet1/4 to ethernet1/9 to cut things over to the new interface. You would just load and commit the updated configuration file when you're ready to cutover traffic.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
