09-22-2012 07:54 PM
Hi,
Would I able to do HA between PA-2500/PA-200 and PA-500 or PA-500 and PA-200?
would it be active/passive or active/active ?
please advice.
09-23-2012 12:08 PM
NO, HA is not supported between different models of Paloalto firewalls. For HA to work both the devices has to be of same exact model. This is required because the traffic ratings/capacities and interfaces of different models differ, so when a fail over happens the devices can not handle the traffic load properly. And also the software features supported by Palo alto firewalls also differ across various platforms, so its not possible to sync the configurations between different models.
Sandeep T
09-23-2012 12:08 PM
NO, HA is not supported between different models of Paloalto firewalls. For HA to work both the devices has to be of same exact model. This is required because the traffic ratings/capacities and interfaces of different models differ, so when a fail over happens the devices can not handle the traffic load properly. And also the software features supported by Palo alto firewalls also differ across various platforms, so its not possible to sync the configurations between different models.
Sandeep T
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
