PA VM Interface Issue

Announcements

ATTENTION Customers, All Partners and Employees: The Customer Support Portal (CSP) will be undergoing maintenance and unavailable on Saturday, November 7, 2020, from 11 am to 11 pm PST. Please read our blog for more information.

Reply
Highlighted
L2 Linker

PA VM Interface Issue

Dear All,

 

I setup test lab with vmware workstation. only ethernet1/1 interface is up. Others are down mode. I have attached screen also . Please advice me.

 

Thanks,

Lakshitha.

Cyber Elite

@Lakshitha,

It doesn't actually look like you attached anything ;-)

 

Have you verified that you've enabled promiscuous mode and Mad Address changes within the VMWare configuration? 

Highlighted
L4 Transporter

I also would suggest to enable "Use Hypervisor Assigned MAC Addresses" under Device -> Setup -> Management -> General Settings

Highlighted
L1 Bithead

Workstation add new interfaces (not default ova interfaces) as E1000 and vm-series requires vmnet3 to work properly. You can reconfigure this in config file. Did you checked this?

Did you configured properly that 'down' interfeces (zones, IPs, etc)?

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!