04-24-2012 06:00 AM
Hi
I have PA 2020 and I want to configure IPsec VPN but the PA is connected to an ADSL Router and the Ouside IP address if PA firewall is private IP address. I don't have a static Public Ip address on PA side.Could it be possible that I can configure PA as dyamic client IP peer. so that only the PA firewall will initate the VPn connection.Please help.
Regards
05-01-2012 12:12 PM
Hi,
Since NAT is being performed on the upstream device, you will probably have to enable NAT-T, the option to do so is a checkbox "enable NAT traversal" under IKE gateway advanced options.
Also, for dynamic VPNs you have the ability to choose local/peer identification as IP/hostname/email address.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
