PA2020 Dynamic IPsec VPN

L1 Bithead

PA2020 Dynamic IPsec VPN


I have PA 2020 and I want to configure IPsec VPN but the PA is connected to an ADSL Router and the Ouside IP address if PA firewall is private IP address.  I don't have a static Public Ip address on PA side.Could it be possible that I can configure PA as dyamic client IP peer.  so that only the PA firewall will initate the VPn connection.Please help.


L7 Applicator


Since NAT is being performed on the upstream device, you will probably have to enable NAT-T, the option to do so is a checkbox "enable NAT traversal" under IKE gateway advanced options.

Also, for dynamic VPNs you have the ability to choose local/peer identification as IP/hostname/email address.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!