Packet Capture (VLAN)

Reply
Highlighted
L1 Bithead

Packet Capture (VLAN)

    How can i capture the packets for only one VLAN? I have a virtual Interface ethernet1/6.40 and if i use a filter for only the interface (ethernet1/6) the PA doesn't capture anything.

Highlighted
L4 Transporter

Re: Packet Capture (VLAN)

Hi

Do you mean you can't select your ethernet1/6.40 on your filtering configuration?

I could select my sub-interface on my box from either CLI or GUI.

> debug dataplane packet-diag set filter match ingress-interface ?

  ethernet1/1     ethernet1/1

  ethernet1/2     ethernet1/2

  ethernet1/2.1   ethernet1/2.1

  ethernet1/3     ethernet1/3

  ethernet1/4     ethernet1/4

  loopback        loopback

  loopback.1      loopback.1

  tunnel          tunnel

  tunnel.1        tunnel.1

  tunnel.2        tunnel.2

  vlan            vlan

  <value>         Ingress hardware interface name

WS000019.JPG

Highlighted
L1 Bithead

Re: Packet Capture (VLAN)

I can't see my sub-interfaces from the CLI

(active)> debug dataplane packet-diag set filter match ingress-interface

  ethernet1/1    ethernet1/1

  ethernet1/11   ethernet1/11

  ethernet1/12   ethernet1/12

  ethernet1/13   ethernet1/13

  ethernet1/14   ethernet1/14

  ethernet1/15   ethernet1/15

  ethernet1/16   ethernet1/16

  ethernet1/2    ethernet1/2

  ethernet1/3    ethernet1/3

  ethernet1/4    ethernet1/4

  ethernet1/5    ethernet1/5

  ethernet1/6    ethernet1/6

  loopback       loopback

  tunnel         tunnel

  vlan           vlan

  <value>        Ingress hardware interface name

(active)> show interface

  all              Show all interface information

  ethernet1/1      ethernet1/1

  ethernet1/1.41   ethernet1/1.41

  ethernet1/11     ethernet1/11

  ethernet1/12     ethernet1/12

  ethernet1/13     ethernet1/13

  ethernet1/14     ethernet1/14

  ethernet1/15     ethernet1/15

  ethernet1/16     ethernet1/16

  ethernet1/2      ethernet1/2

  ethernet1/2.43   ethernet1/2.43

  ethernet1/3      ethernet1/3

  ethernet1/3.45   ethernet1/3.45

  ethernet1/4      ethernet1/4

  ethernet1/4.46   ethernet1/4.46

  ethernet1/5      ethernet1/5

  ethernet1/5.22   ethernet1/5.22

  ethernet1/6      ethernet1/6

  ethernet1/6.40   ethernet1/6.40

  hardware         Show all hardware interface information

  logical          Show all logical interface information

  loopback         loopback

  management       Show management interface information

  tunnel           tunnel

  vlan             vlan

  <value>          <name> interface name

Highlighted
L4 Transporter

Re: Packet Capture (VLAN)

Hmm...I'm using v5.0.4. How about your box?

Highlighted
L1 Bithead

Re: Packet Capture (VLAN)

4.1.8-h3

Highlighted
L4 Transporter

Re: Packet Capture (VLAN)

I confirmed with my PA-5020.

Both 4.1.10 and 4.1.12 would not show me sub-interface.

I'm not sure this is bug or not.

You should open a case and ask PAN selecting sub-interface for pcap is new feature from 5.0 or not.

Regards,

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!