Palo Alto Active/Passive > eBGP to ISP > VLANs for ToR switches (Juniper)

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Palo Alto Active/Passive > eBGP to ISP > VLANs for ToR switches (Juniper)

L2 Linker

Up top, have an eBGP peering with ISP.

 

Trusted Zone > L2 Links down to Nexus > then Juniper ToR switches aggregating servers

The firewall will perform L3 and contain the VLANs.

 

How would you go about the connections from Palo > Nexus > Juniper 

 

 

2 REPLIES 2

Cyber Elite
Cyber Elite

Hello,

If you are referring to a routing protocol, I would recommend OSPF. 

 

Regards,

I would take the Nexus out back and burn it...

 

Are you routing on the devices other than the PAN?  If it's all layer 2, then you won't be using any routing protocols.  I don't really understand your question.

  • 3016 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!