Palo Alto RADIUS authentication against Microsoft NPS is broken

Reply
nwsol
L2 Linker

Recreating the RADIUS server profile did the trick. (actually, changed the timeout and retry from 3 to 2 and pushed from panorama). The system log now says it switched to PAP for that radius server.

 

That's a nasty bug... Never would have tought 'touching' the radius config could fix the issue...

View solution in original post

BLH
L2 Linker

Found this issue on another firewall (Panorama 7.0.2) - I could also resolve it by modifying the RADIUS configuration. Great find!

BLH
L2 Linker

Woop woop.. From the PAN-OS 7.0.4 release notes:

 

Added a new CLI operational command ( set authentication radius-auth-type <auto|chap|pap> ) to address an incompatibility issue between PAN-OS and some RADIUS servers. With this fix, you can manually override the automatic selection mechanism introduced with Challenge-Handshake Authentication Protocol (CHAP) support in PAN-OS 7.0 to select either CHAP or Password Authentication Protocol (PAP) as needed.

 

TLDR; CLI command set authentication radius-auth-type <auto|chap|pap>

rbista
L3 Networker

Thank you. But, it looks like it can be done only via CLI, how about configuring CHAP from GUI? 

rbista
L3 Networker

Well, even from the CLI, it doesn't seem to take the command. 

rbista@MyFirewall> configure
Entering configuration mode
[edit]
rbista@MyFirewall# set authentication radius-auth-type chap

Invalid syntax.
[edit]
rbista@MyFirewall# 

 

Any suggestions? I ran the command # find command keyword "radius-auth-type", it display the command though. 

rbista@MyFirewall> find command keyword "radius-auth-type"
set authentication radius-auth-type <auto|chap|pap>
rbista@MyFirewall>

pankaku
L5 Sessionator

What is the PAN-OS on the firewall?

pankaku
L5 Sessionator

It will work on PAN-OS 7.0.4. You dont have to go in configure mode.

 

admin@fw63> set authentication radius-auth-type chap

 

Hope this helps!

 

Merry Christmas :)

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!