01-23-2023 02:22 AM
Since updating our firmware to 10.2 we have noticed that ha1 shows down in our monitoring tool but is showing as up on the device. Has anyone seen anything like this before? This is on multiple devices and has not effected the PA-800's.
01-23-2023 02:55 AM
Hi @LukeRath ,
This is most likely because your monitoring system is monitoring the wrong OID for the HA interface.
You should easily be able to confirm this by performing snmpwalk to the firewall and check the OID for the HA interface and compare it with what your monitoring is using.
Fix this should be event easier - just re-discover the device in your monitoring system.
As you can see something similar have happened to others as well - https://live.paloaltonetworks.com/t5/general-topics/upgraded-from-v9-to-v10-and-snmp-traffic-statist...
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!