Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
01-17-2024 07:09 AM
I wanted to make sure I had the settings correct for configuring DHCPv6 on my WAN interface for Starlink. I can confirm that I did get an allocation of IPv6 addressing with a /56 prefix and was successfully able to get an IPv6 address assigned to my internal interface.
The issue is, it appears I have not gotten an actual perm or temp address on my WAN interface, although I did get a Prefix delegation? I did accept the RA on the external side, but no actual route was placed into the routing table yet.
Would this be an issue on ISP side? or my side? I believe it to be on the ISP side, but I could be wrong.
01-19-2024 07:06 AM
I figured it out. WAN interface will not get its own IPv6 address...just had to put the link local default route in and then everything started working. SLAAC was working with internal clients as well.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
