04-19-2013 10:05 AM
Did anyone see this situation.
We have PA 3020 running 5.0.2 and a route based vpn to another PA box.
unable to ping the other side of the tunnel or even the other side's tunnel interface IP address.
Weird issue never seen this before.
Anyone see this before? Please let me know.
Thanks
Junaid
04-19-2013 12:00 PM
yes tunnel is up between the two gateways
but no traffic is going through the gateways.
IPSEC status shows UP.
cleared the arp.
rebooted the firewall.
didn't help at all. This was all working fine until this morning.
Then as a last resort, removed VPN config and re-built it from the scratch and that got it working.
The puzzling thing is " what happened that killed the connection" every thing was working just fine and then this.
Weird!!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
