- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-23-2021 11:28 PM
Hi,
Do we need a security policy, once the PBR configured in the firewall?
OR
FW just forward the packet to the Egress interface and not look for the security policy.
Thanks.
02-24-2021 12:37 AM
Hi Chirag,
As per the Policy-Based Forwarding concept, the PBF rules are checked before the routing table and if any match then the routing table is skipped and send to next-hop as per policy configuration.
So Security policies are to permit or deny traffic and PBF rules are used to decide where traffic should go to.
Regards,
Suresh
02-24-2021 12:37 AM
Hi Chirag,
As per the Policy-Based Forwarding concept, the PBF rules are checked before the routing table and if any match then the routing table is skipped and send to next-hop as per policy configuration.
So Security policies are to permit or deny traffic and PBF rules are used to decide where traffic should go to.
Regards,
Suresh
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!