Policy based routing

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Policy based routing

L2 Linker

Hi,

 

Do we need a security policy, once the PBR configured in the firewall?

 

OR 

 

FW just forward the packet to the Egress interface and not look for the security policy.

 

Thanks.

 

1 accepted solution

Accepted Solutions

L3 Networker

Hi Chirag,

 

As per the Policy-Based Forwarding concept, the PBF rules are checked before the routing table and if any match then the routing table is skipped and send to next-hop as per policy configuration.

So Security policies are to permit or deny traffic and PBF rules are used to decide where traffic should go to.

 

Regards,

Suresh

Sureshreddymudhireddy

View solution in original post

2 REPLIES 2

L3 Networker

Hi Chirag,

 

As per the Policy-Based Forwarding concept, the PBF rules are checked before the routing table and if any match then the routing table is skipped and send to next-hop as per policy configuration.

So Security policies are to permit or deny traffic and PBF rules are used to decide where traffic should go to.

 

Regards,

Suresh

Sureshreddymudhireddy

Thanks, Suresh.

  • 1 accepted solution
  • 2863 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!