02-23-2022 11:15 PM
I am trying to push a template stack to FW, the same one is pushed to a lot other FWs but here i get this error
. In virtual-router vr1, OSPFv2 is not supported on unnumbered interface ethernet1/1 in area 0.0.0.0.
. In virtual-router vr1, OSPFv2 is not supported on unnumbered interface ethernet1/2 in area 0.0.0.0.
02-24-2022 12:02 AM
Hi @Jagdev_Dhaliwal ,
I'm guessing the device doesn't have any configuration on it's eth1/1 and eth1/2 interfaces.
Try pushing the eth configuration first so that the interfaces are numbered and after that push the OSPF configuration.
02-24-2022 12:18 AM
Thanks for the response Kiwi,
In temperate it call the Eth variables however I have already added the IP address to template for the interfaces but still no luck
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!