Proper SNMP v3 Configuration

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Proper SNMP v3 Configuration

L0 Member

Hello,

 

One of our customer is having "Palo Alto Networks PA-500 Series Firewall".

For SNMP v2 all ok, but customer wants to start using SNMP v3.

Please, advice with setting proper SNMP v3 to monitor from Zabbix.

 

I`m not familiar with Palo Alto devices. 😞

2 REPLIES 2

L6 Presenter

Hi,

 

Did you try to check admin guide or article below:

 

https://live.paloaltonetworks.com/t5/Configuration-Articles/How-to-Configure-SNMPv3-Polling/ta-p/582...

 

this sort of info should be there.

 

Thx,

Myky

Thank you for your hint.

I read some documents regarding snmp for device but stuck on view and mask values.

Because customer wanted all.

I will try.

 

Thanks!

  • 3023 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!