Push is grayed out

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Push is grayed out

L3 Networker

Hi Login Banner and System Log are created and commited in Panorama. and then click on Push button on top right corner. I got the below window. Why the Bush is grayed out? Is there something needed to completed before the Push? Thank you

 

 

kevinospf_0-1694271331632.png

 

3 accepted solutions

Accepted Solutions

L3 Networker

Thanks all for your reply! Looks like template alone cannot be pushed. and it need stack together with template. Is this correct? 

View solution in original post

L2 Linker

Hello @kevinospf,

 

A template is associated (usually) with a template stack. You then associate the firewalls to the template stack. Eventually when you push the settings it's the template stack settings that have the options inherited from the templates.

 

If the modified template is not added to any template stack then there's no push available since Panorama will not know where to push that template.

 

I hope it helps.

Don't forget to Like if you find this post helpful

View solution in original post

Cyber Elite
Cyber Elite

Hi @kevinospf ,

 

Nothing will be pushed from a template or template stack unless you have a device associated with it.  You can only associated devices with template stacks.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

View solution in original post

6 REPLIES 6

Cyber Elite
Cyber Elite

Hi @kevinospf ,

 

There is nothing in the Push Scope which means there is no config to push to any devices.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

Cyber Elite
Cyber Elite

If you have made changes and Push Scope is empty then just give Panorama some time and it will fill it up.

Enterprise Architect, Security @ Cloud Carib Ltd
Palo Alto Networks certified from 2011

L2 Linker

Hello @kevinospf ,

 

The push being greyed out it also depending on what type of configuration you have changed. For example if the Loin Banner was the Panorama one, a simple commit will suffice since the changes only affects the Panorama device and no other firewall.

 

If, for example, you've changed some settings in the Template section (Network/Device) like you have highlighted in the background of your screenshot, there are a couple of possibilities for the Push option to be greyed out:

  • Depending on the load of Panorama it can take a little bit more time for the commit to finish and for the push button to be active (like @Raido_Rattameister suggested) because maybe the commit didn't finished or internal Panorama processes, post-commit didn't finish.
  • Other admin had already pushed your commit changes, which can be seen in the Task window
  • Your user does not have access to push changes (based on your admin roles)
  • Template stack has no firewall assigned.
  • Firewalls are not reachable by Panorama (connected).

Is it possible to validate the above list and, in case it's none of the above, to present some more details?

 

I hope this helps.

Don't forget to Like if you find this post helpful

L3 Networker

Thanks all for your reply! Looks like template alone cannot be pushed. and it need stack together with template. Is this correct? 

L2 Linker

Hello @kevinospf,

 

A template is associated (usually) with a template stack. You then associate the firewalls to the template stack. Eventually when you push the settings it's the template stack settings that have the options inherited from the templates.

 

If the modified template is not added to any template stack then there's no push available since Panorama will not know where to push that template.

 

I hope it helps.

Don't forget to Like if you find this post helpful

Cyber Elite
Cyber Elite

Hi @kevinospf ,

 

Nothing will be pushed from a template or template stack unless you have a device associated with it.  You can only associated devices with template stacks.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.
  • 3 accepted solutions
  • 2924 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!