PXE Boot Not Working

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PXE Boot Not Working

L3 Networker

Hello everyone,

I have a new issue where a PA3020 has been placed between Client and Server subnets on the network. Since this install, building new PCs using PXE boot and deploying Applications using Windows SCCM no longer works.

The build starts and the client picks an IP address. On the logs, I can see successful traffic flows between Client and Server with application 'ms-sms' with Session End Reason 'tcp-fin'. So that stage seems fine. However afterwards, i start seeing TFTP traffic between both and this time the Session End Reason is 'aged-out'.

The traffic is being allowed through. And yes, tftp has been allowed in both directions on all ports.

 

Any thoughts or ideas please?

Thanks

4 REPLIES 4

L4 Transporter

Hi Bocsa,

 

TFTP is UDP traffic, so if you allow this then the session end reason will nearly always be aged-out as it is connectionless.

 

Are you able to provide the detailed log view of the tftp traffic? You can grab this by clicking the spyglass on the left of the log.

 

You may need to run a packet capture of the flow to properly identify the cause of the issue.

 

Ben

Hi,

Detailed traffic view doesn't show much (attached).screenshot.jpg

L4 Transporter

Hello

 

If Your PC and WDS are in different network subnets You have to configure option 67 on DHCP serwer (on PC subnet)

Check this out:

https://community.spiceworks.com/topic/271704-windows-deployment-services-accross-subnets

 

Regards

SLawek


@_slv_ wrote:

Hello

 

If Your PC and WDS are in different network subnets You have to configure option 67 on DHCP serwer (on PC subnet)

Check this out:

https://community.spiceworks.com/topic/271704-windows-deployment-services-accross-subnets

 

Regards

SLawek


Or even better since using DHCP options for WDS isn't recommended as best practice anymore, add your WDS server to the list of DHCP servers in DHCP Relay. This won't work if the PA is your DHCP server.

  • 9921 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!