QOS Config

[mcterzioglu]

Hi,

     I want to define separate profiles for upload and download for sub-interface, I couldn't succeed, can you help with the issue?

(ip subnets and zone is correct)

 

 if the TEST_DOWLOAND RULE is top it working for dowloand qos but not working UPLOAD qos rule. 

 if the TEST_UPLOAD RULE is top it working for UPLOADqos but not working DOWLOAND qos rule.

Please note you are posting a public message where community members and experts can provide assistance. Sharing private information such as serial numbers or company information is not recommended.

[Raido_Rattameister · Accepted solution]

Same session can't be classified to both class 2 and class 3 at the same time.

First QoS policy that matches will be applied and no further policies checked.

Leave only 1 QoS policy.

Set both Download and Upload profiles to same class (same you use in QoS policy).

It is always good to have class 4 in QoS profile as best practice even if you don't use it in policies as it is default class.

Also do they need real-time priority?

[reaper]

as @Raido_Rattameister mentioned you can't apply 2 different classes to the same traffic

you also need to take into account QoS is only applied in 1 direction (egress) at a time, so you need to have a QoS profile on the external interface for the upload, and a profile on the internal interface for the download. since you can only classify a flow once, you need to make sure the same class is represented in both interfaces and has the appropriate configuration for what you want to apply in that 'direction' (ie you can set a max of 40 on class 3 in the upload profile and a max of 1000 on class 3 in the download profile)

[mcterzioglu]

"Also do they need real-time priority? - No, I dn't need i'll change it.

Thank your help i get it now it's working.

I want to do 10 qos profil like that QOS 1= 1 dowloand and upload QOS 2= 2 dowloand and upload ...... QOS 10= 50+ dowloand and upload. When i do this it's not working.

if i change (NETWORK>OQS>INTERFACE>DEFAULT PROFILE>CLEAR TEXT) clear text profile just work this QOS profile the other not working.

In some sources, it says that you can only do subinterface qos in pa 3000, 5000 and 7000 series. My device is pa-440 can i do qos on sub-interface?

[mcterzioglu]

Thank you for help, i understandclearly now.