- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
11-08-2021 03:33 AM
Hello Bro,
We are in process to configure QOS rules to control SMB over VPN.
The tunnel interface can't be set as a destination interface, does that mean to use the interface that serving the tunnel?
if I use the interface as the destination interface I receive error states that "destinaton interface must be a subif".
SSL VPN configured on the interface tunnel.1
Any ideas on ow to configure this or links to help
TIA
11-08-2021 03:39 AM
Hello,
Take a look in this link:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClS0CAK
Regards,
11-08-2021 05:04 AM
I have seen this link, and my question arrised when I saw it that If I don't have set source and destination interfaces or not. because in my case the one of two ends are tunnel inteface ethernet 1/x "which the tunnel created in" and the other is subinterface.
11-08-2021 01:57 PM
Hello,
QoS is applied to the physical egress interface. So Apply QoS to the main physical interface and the sub interfaces also get the policy. i.e. Lets say I have 1/5 with sub interfaces 1/5.10 and 1/5/20. I would apply the QoS to interface 1/5.
I hope this clarifies things.
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!