rcv_fifo_overrun on all ethernet interfaces

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

rcv_fifo_overrun on all ethernet interfaces

L1 Bithead

Hi All,

 

I want to ask if you encountered the same issue after updating the firewall software to 10.1.6-h6, we started seeing these errors. 

Does anyone know which version could fix it?

2 REPLIES 2

L4 Transporter

Hello @mudvayne15 

 

Check this KB, maybe help you

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PLJ7CAO

 

Best Regards

High Sticker

@Metgatz 

Thanks for your feedback, I have investigated that as well. However, the ports are nowhere near 50% utilization during peak hours, 4 ethernet ports are load balanced and all of them exhibit the same behavior which generates rcv_fifo_overrun.

Prior to updating the firmware, our monitoring logs are clear. After the update the following day, it started to generate that error. 

 

 

  • 1376 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!