RDP Session Freezes for a few seconds and than continues

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

RDP Session Freezes for a few seconds and than continues

L2 Linker

Hi all,

We are having an issue with RDP sessions.

We recently moved the traffic from a L3 switch to our Palo NGFW and since then Occasionally, RDP sessions freezes for only a few seconds and than continue regularly. 

We tried app-override to see if it app-id related, but that didn't solve the issue.

We also tried to change registry values according to this article https://live.paloaltonetworks.com/t5/general-topics/rdp-freeze-fix-globalprotect/td-p/335816 but still not solved.

I would say that it happens on a specific segment. It seem to be working well on other segments (Through the FW).

Does anyone have any suggestions?

1 accepted solution

Accepted Solutions

L2 Linker

Hi all,

Thanks for the help.

At the end we opened a case with TAC and they found the problem and the issue was solved.

We had application override that changed the ms-rdp app to rtcp app.

With rtcp app the ttl was 180 s while with the ms-rdp it was much higher and that was the reason the session was freezed (apparently it happened every time the system was idle which explains the ttl difference).

View solution in original post

7 REPLIES 7

Cyber Elite
Cyber Elite

Hello,

If the device is not super constrained for resources and its still occurring, you could try to disable the  server response inspection feature in the policy that is being used for the traffic. the check box in under the Actions tab when editing the policy.

Might help.

Cheers!

Thanks,

The device is not super constrained for resources and its still occurring in a lot of RDP sessions.

We did see counters for interfaces on the FW showing increased rcv_fifo_overrun.

Cyber Elite
Cyber Elite

@AmitKa79,

I've found that I get better RDP performance through PAN when you disable the ability to use UDP. Might want to try that on a machine that you're having an issue with and see if that goes away. 

Thanks for the suggestion.

We already tried that but it seems that the issue still persists.

We created a custom-rdp app and placed it in an app override policy rule. that didn't solve the issue as well. 

Cyber Elite
Cyber Elite

Hi @AmitKa79,

 

I had a customer for which we replaced a FW with PANW.  His RDP sessions became terribly slow.  We never could find the solution on the NGFW, but it started when we put the new NGFW in place just like your scenario.  We disabled UDP in the RDP config of each server as @BPry suggested, and the performance improved dramatically.  Just sharing my experience.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

Thank you all for the help,

Unfortunately the issue still persist, even after doing all that was suggested here, so we open a case with TAC.

L2 Linker

Hi all,

Thanks for the help.

At the end we opened a case with TAC and they found the problem and the issue was solved.

We had application override that changed the ms-rdp app to rtcp app.

With rtcp app the ttl was 180 s while with the ms-rdp it was much higher and that was the reason the session was freezed (apparently it happened every time the system was idle which explains the ttl difference).

  • 1 accepted solution
  • 3908 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!