Reach Management Interface via SSL-VPN

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Reach Management Interface via SSL-VPN

L1 Bithead

Hi all,

I have a little problem, I've installed a PA-500 and configured SSL-VPN, it works fine, I can reach the internal network correctly but I can't reach the management Interface.

This is the scenario:

VPN Clients:

IP: 10.31.31.10-10.31.31.254

Management Interface:

IP: 10.7.10.251

Gateway: 10.7.10.3

The gateway already knows the routes to reach 10.31.31.0/24 via Ethernet1/2 of PAN.

I can see in Traffic Log that packets pass through Interface tunnel.1 to Ethernet1/2 (Trust to Trust), but nothing came back.

Have you any idea about?

1 accepted solution

Accepted Solutions

L4 Transporter

triitech wrote:

Hi all,

I have a little problem, I've installed a PA-500 and configured SSL-VPN, it works fine, I can reach the internal network correctly but I can't reach the management Interface.

This is the scenario:

VPN Clients:

IP: 10.31.31.10-10.31.31.254

Management Interface:

IP: 10.7.10.251

Gateway: 10.7.10.3

The gateway already knows the routes to reach 10.31.31.0/24 via Ethernet1/2 of PAN.

I can see in Traffic Log that packets pass through Interface tunnel.1 to Ethernet1/2 (Trust to Trust), but nothing came back.

Have you any idea about?

What security policy do you have on your SSL VPN? Does it allow https to the network range (or specific IP address) your management interface is connected to?

View solution in original post

3 REPLIES 3

L4 Transporter

Do you have the management interface locked down to certain IP addresses?

L4 Transporter

triitech wrote:

Hi all,

I have a little problem, I've installed a PA-500 and configured SSL-VPN, it works fine, I can reach the internal network correctly but I can't reach the management Interface.

This is the scenario:

VPN Clients:

IP: 10.31.31.10-10.31.31.254

Management Interface:

IP: 10.7.10.251

Gateway: 10.7.10.3

The gateway already knows the routes to reach 10.31.31.0/24 via Ethernet1/2 of PAN.

I can see in Traffic Log that packets pass through Interface tunnel.1 to Ethernet1/2 (Trust to Trust), but nothing came back.

Have you any idea about?

What security policy do you have on your SSL VPN? Does it allow https to the network range (or specific IP address) your management interface is connected to?

Thanks for all replies,

the problem was that was missing the correct policy to permit traffic from tunnel to management interface for class 10.31.31.0/24.

Now I can reach the managemente interface without problems.

Regards

Alessio

  • 1 accepted solution
  • 2816 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!