Replace option via CLI - can you do it?

[dagibbs]

Hi.

I have a situation on my PAN where I need to replace all instances of a given IP address (it's a "Next Hop" address in the virtual router) with a different IP address.

Through the GUI, I can only delete and re-enter all the access routes - time consuming, given there are about 35 of them concernedf with this change.

Is there a command from the CLI will is the equivalent of Juniper's "replace" command which allows you to do a search/replace for all given instances of a string int he current running configuration?

I've searched the CLI guide but can't seem to find anything obvious.

Failing that, is tehre a way via the GUI to edit/replace all instances of a next-hop address other than deleting each access-route and re-entering it?

Thanks

[reaper]

To do a mass replace you could export the config file from the device tab, open the file in any text editor, replace all instances you want to replace and reimport the file back onto the device .

[panwmod]

The following works for me in PAN-OS 4.0.2

# change the output format of the CLI

set cli config-output-format set

# change to configure mode

configure

# display the current routing table

show network virtual-router default routing-table ip static-route

set network virtual-router default routing-table ip static-route network-192 destination 192.168.222.0/24

set network virtual-router default routing-table ip static-route network-192 nexthop ip-address 1.1.1.1

[edit]

# copy the output to a text editor and replace the IP

# paste the 'nexthop' lines into CLIset network virtual-router default routing-table ip static-route network-192 nexthop ip-address 1.1.1.2

# confirm the result before commiting

Thanks

Ulli

[dagibbs]

tpiens wrote:
To do a mass replace you could export the config file from the device tab, open the file in any text editor, replace all instances you want to replace and reimport the file back onto the device .

Yeah, I was hoping to avoid doing that. 🙂

The "replace" keyword is one of JunOS's most useful CLI editing features, and since PanOS appears to be at least based on JunOS I was hoping it'd have something similar in CLI.

Guess I'll do it the hard way.

Thanks.

[dagibbs]

ulli.volk wrote:
The following works for me in PAN-OS 4.0.2

Sorry, my bad - I didn't specify OS version. I haven't upgraded to the 4.x stream yet - running 3.1.8.

Thanks anyway.

[panwmod]

Just tried it on my test box running 3.1.7, seems to works as well.

Thanks

Ulli