request sc3 reset API

[JasonRakersKSS]

Does anyone have the XML API syntax for the "request sc3 reset" commands on the local firewall.   

1. request sc3 reset 
2. debug software restart process management-server

If not I guess i will gather it with the debug cli on.  But was hoping someone could save me a step 🙂

[JayGolf]

Hi @JasonRakersKSS ,

Have you had any luck with debug cli on? 

[emr_1 · Accepted solution]

At first, this doc is helpful.

https://docs.paloaltonetworks.com/pan-os/11-1/pan-os-panorama-api/get-started-with-the-pan-os-xml-ap...

Here is my test result

1) Check API syntax

admin@PA-5410> debug cli on
admin@PA-5410> request sc3 reset
(container-tag: sc3 container-tag: reset pop-tag: pop-tag:)
((eol-matched: . #t) (confirmation-message: . WARNING: executing this command will reset SC3 state on this device. You will need to re-onboard the system (using an authkey). Do you want to continue?) (context-inserted-at-end-p: . #f))
WARNING: executing this command will reset SC3 state on this device. You will need to re-onboard the system (using an authkey). Do you want to continue? (y or n)


<request cmd="op" cookie="8284738022950153" uid="1001"><operations><request><sc3><reset/></sc3></request></operations></request>


2024-09-11 09:56:19
<response status="success"><msg>SC3 has been reset!
You need to restart mgmtsrvr to reinit SC3.</msg></response>

SC3 has been reset!
You need to restart mgmtsrvr to reinit SC3.

admin@PA-5410>


admin@PA-5410> debug software restart process management-server
(container-tag: sdebuoftware container-tag: restart leaf-tag: process value: management-server pop-tag: pop-tag:)
((eol-matched: . #t) (context-inserted-at-end-p: . #f))


<request cmd="op" cookie="1502434451239817" uid="1001"><operations><debug><software><restart><process>management-server</process></restart></software></debug></operations></request>


2024-09-11 09:53:22
#f

admin@PA-5410> 

2) Check same command by curl. Looks this worked on my platform (PA-5410 v11.1.4)

curl --insecure -X POST "https://<my firewall IP>/api/?type=op&cmd=<request><sc3><reset/></sc3></request>&key=<my api key>"

curl --insecure -X POST "https://<my firewall IP>/api/?type=op&cmd=<debug><software><restart><process>management-server</process></restart></software></debug>&key=<my api key>"

[JasonRakersKSS]

thank you!  My hero.

[IslaBaxter]

Thank you so much for the help.