- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
09-16-2024 08:41 AM
I configuring a HUB for SDWAN with vpn, however this firewall currently have vpn tunnels to 3rd parties. Due to this I am planning on using a separate wan ip for sd-wan. However I do not have free ports on my firewall for this. Is it possible to configure a SDWAN HUB to use a natted loopback? If so I am not seeing any place to configure teh sd-wan interface profile for the loopback
09-16-2024 10:07 AM
In my similar situation, I used an untagged sub-interface to terminate non-SDWAN tunnel connections.
09-16-2024 10:15 AM
wouldnt this cause a conflict? if the parent interface has an ip of 1.1.1.1/24 and the sub interface has an ip of 1.1.1.2/24 wouldnt that cause an issue?
09-17-2024 05:57 PM
I tried doing this but I am getting an ARP issue, can you please go into detail regarding this setup?
09-26-2024 07:42 AM
Capability to use multiple IPs on SD-WAN participating interfaces was introduced with 11.1.0+ and plugin 3.2, so make sure you use those versions as minimum. Also, SD-WAN terminating IP will need to be first added then all additional IPs that you will have up to 4.
You can't terminate SD-WAN on a loopback currently, only on Physical Ethernet, AE, or Ethernet or AE subinterface.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!