09-11-2012 01:37 AM
Hi everybody,
how is it possible to configure a second ip-address in the same subnet as the first one on the same interface?
i tried to give the interface a second one, but it wasn't committed. also an arp-entry didn't work.
thx in advance
09-11-2012 06:28 AM
You cannot assign two ip addresses from the same subnet on an interface. If your interface is configured for say 10.0.0.0/8, it will proxy arp for all the addresses that are part of this network. If you need to assign 2 IPs, make sure their subnets do not overlap.
09-11-2012 04:58 AM
I believe that interface will proxy ARP for all IP addresses in that subnet.
Another option would be to use a loopback interface, and assign the second IP address to that interface.
09-11-2012 06:28 AM
You cannot assign two ip addresses from the same subnet on an interface. If your interface is configured for say 10.0.0.0/8, it will proxy arp for all the addresses that are part of this network. If you need to assign 2 IPs, make sure their subnets do not overlap.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
