I'm trying to setup an alarm to trigger is we have excessive drops on a firewall rule.
When looking at this functionality the Help section states:-
"Use Security Policy Tags to specify the tags for which the rule limit thresholds will generate alarms. These tags become available to be specified when defining security policies".
However, whenever I create a Tag here it does not become available for rules in the Policy section? I'm on 6.0.2, but looked at this a while back on v4\5 and couldn;t find out what I was dougn wrong - any ideas?
You need to first create the tag under Policies --> Security and then you can add it under Device --> Alarms --> Security Policy Tags (after you check security policy limits and group limits and specify thresholds). You cannot create new tags directly under Security Policy Tags.
Hope this helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!