Security Policy Limit Alarms

[apackard]

I'm trying to setup an alarm to trigger is we have excessive drops on a firewall rule.

When looking at this functionality the Help section states:-

"Use Security Policy Tags to specify the tags for which the rule limit thresholds will generate alarms. These tags become available to be specified when defining security policies".

However, whenever I create a Tag here it does not become available for rules in the Policy section?  I'm on 6.0.2, but looked at this a while back on v4\5 and couldn;t find out what I was dougn wrong - any ideas?

[Mystique]

You need to first create the tag under Policies --> Security and then you can add it under Device --> Alarms --> Security Policy Tags (after you check security policy limits and group limits and specify thresholds). You cannot create new tags directly under Security Policy Tags.

Hope this helps.

[dburns · Accepted solution]

You have to generate the tags before they will show up. If you have already created a tag make sure it's a security rule tag and not a tag under Objects -> Tags

Dominic

[apackard]

Thanks for replies - sorted (bad Help file is my excuse!).

Does anyone know if there's a way of emailing Alerts?  It's a bit limiting having to rely on having an open web console to see something being triggered!

Cheers