Session Expire Time one month

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Session Expire Time one month

L3 Networker



The session expiration time is more than a month apart.


I'm using the 10.1.8 version and my search says it's a firmware bug.


However, the same symptoms appear in version 10.2.1.


Is there a solution in relation to it?


L5 Sessionator

What is the session timeout of the device set to? It looks like the default value is 30 days if nothing is specified. 


Device > Setup > Management > Authentication Setting > Max Session Time


Device > Setup > Management (


"Enter the number of minutes (range is 60 to 1,499) that an active, non-idle administrator can remain logged in. Once this max session time is reached, the session is terminated and requires re-authentication to begin another session. The default value is set to 0 (30 days), which cannot be manually entered. If no value is entered, the Max Session Time defaults to 0."

Cyber Elite
Cyber Elite


So the last login time and the current login aren't displaying the same thing to be clear. You should have 30 days by default for the session expire time at the time of the current login session. So if you login at 0600 today on 2023-09-14, you would expect to see the session expire time of 2023-10-14 at exactly the same time as your current login session.

The 'Last Login Time' is exactly that, it's the last time you authenticated. That is to say, it isn't the current login session, but the session that you had previously authenticated. Its displayed so that you can see not the current login time, but rather the last time that the device shows that you authenticated. This is so you can potentially identify any abnormal login activity if your last login time doesn't line up with the last time you actually logged into the device.


Hopefully that helps, but the two values aren't directly related at all. 

  • 2 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!