Shared Gateway cannot able to mange from Panoroma GUI

Reply
L3 Networker

Shared Gateway cannot able to mange from Panoroma GUI

Hello Community,

I have Panorama M-500 that managed cluster of PA-5000 with some Virtual System, I use one Device Group for one VSYS.

Now I need to configure the Shared Gateway.

It seems that I can manage the NAT Policy related to the Shared Group only into CLI of Panorama and not from Panorama GUI

Could you confirm me I cannot managed it via Panorama?


Accepted Solutions
Highlighted
L0 Member

Re: Shared Gateway cannot able to mange from Panoroma GUI

Hi Joe,

 

I have the same issue. Let me explain,

When I am on the actual firewall, I have an option to choose sg1 (Shared gateway) as a Virtual System under the Policies tab. Here I have the option to create NAT policy or Policy Based Forwarding.

 

When I go to the Panorama, under the policies tab, I can only see the device-groups that I have created. Not sure where I would apply the NAT configuration for the Shared gateway.

View solution in original post


All Replies
Highlighted
Community Team Member

Re: Shared Gateway cannot able to mange from Panoroma GUI

I am not sure why you cannot do this.. this is a built in feature.

Are you just not finding the option? or it is not letting you? 

 

I would start with this article here:

CONFIGURING DESTINATION NAT USING A VSYS WITH SHARED GATEWAY

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClHxCAK

 

This should explain how to do this.  

joe

Stay Secure,
Joe
End of line
Highlighted
L0 Member

Re: Shared Gateway cannot able to mange from Panoroma GUI

Hi Joe,

 

I have the same issue. Let me explain,

When I am on the actual firewall, I have an option to choose sg1 (Shared gateway) as a Virtual System under the Policies tab. Here I have the option to create NAT policy or Policy Based Forwarding.

 

When I go to the Panorama, under the policies tab, I can only see the device-groups that I have created. Not sure where I would apply the NAT configuration for the Shared gateway.

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!