site2site vpn. calling end is dynamic

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

site2site vpn. calling end is dynamic

L4 Transporter

I have a Palo gateway connecting via ipsec to a Palo gateway, the calling end has a dynamic IP and will need NAT-T.  The called end has a static public IP.  Whats the recommended method of using an identifier?

3 REPLIES 3

Cyber Elite
Cyber Elite

Hello,

Not knowing what setting you are attempting to configure, I would say a DNS entry with an object on the device that performs the DNS resolution.

Regards,

Thanks for the reply. Please assume one end has a dynamic IP and no DNS is available. Can i use the username@domainname  identifier on the calling end?

Cyber Elite
Cyber Elite

Hello,

A dns name that gets registered. I would stick with on a period as a special character, but dont know for sure.

Regards,

  • 1137 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!