SNMP: Threat Counter or "ACC Risk Factor"

Showing results for 
Show  only  | Search instead for 
Did you mean: 

SNMP: Threat Counter or "ACC Risk Factor"

Hello all,

we have 2 PA-850 Firewalls with Pan OS 10.1 and I would like to read out the ACC Risk Factor via SNMP.
Unfortunately I have not found anything in the SNMP Mibs.
Does anyone have a tip for me?


Best regards


Community Team Member

Hi @KetchupKaffeetasse ,


There's an older thread indicating this was impossible at the time:


You might want to add your vote to the existing feature request for this (FRID #1912:  Support for ACC risk factor via SNMP).


As a workaround you might want to try achieving this using API ?

This should give the
#sessions and #bytes for each risk level for the specified period, and the monitoring tool can calculate a weighted risk similar to the one shown on ACC.
Hope this helps.
LIVEcommunity team member, CISSP
Don't forget to hit that Like button if a post is helpful to you!
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!