Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

spoof

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

spoof

L4 Transporter

Hi,

How palo alto blocks if ip address is spoofed .
Why does it not work in vwire mode
Thanks

1 accepted solution

Accepted Solutions

L7 Applicator

The Palo Alto uses the routing table to help determine if the address is spoofed.

 

https://live.paloaltonetworks.com/t5/Featured-Articles/Zone-protection-profiles/ta-p/70687

Quote:

Select the check box to enable protection against IP address spoofing. PAN-OS uses the routing table on the device to verify if the source IP of the traffic is arriving on the appropriate interface. If this is not the case the packet will be discarded.

 

Thus this is not applicable in v-wire mode that has no routing table and is just a virtual wire connecting two devices.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center

View solution in original post

1 REPLY 1

L7 Applicator

The Palo Alto uses the routing table to help determine if the address is spoofed.

 

https://live.paloaltonetworks.com/t5/Featured-Articles/Zone-protection-profiles/ta-p/70687

Quote:

Select the check box to enable protection against IP address spoofing. PAN-OS uses the routing table on the device to verify if the source IP of the traffic is arriving on the appropriate interface. If this is not the case the packet will be discarded.

 

Thus this is not applicable in v-wire mode that has no routing table and is just a virtual wire connecting two devices.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
  • 1 accepted solution
  • 3133 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!