Static Route monitoring and NAT

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Static Route monitoring and NAT

L1 Bithead

I'm having an issue with my NAT policy. 
I've configured a backup ISP connection with a static route and a higher metric. When the primary ISP connection fails the routing portion works correctly and I can see the primary default route get removed from the routing table and the secondary kick in. 

 

However,  the NAT policy is still trying to use primary ISP connection NAT rule. 

 

Any ideas, anybody?

2 REPLIES 2

Cyber Elite
Cyber Elite

Are both wan interfaces in same zone?

If they are then don't leave "Destination Interface" to "Any"

Enterprise Architect, Security @ Cloud Carib Ltd
Palo Alto Networks certified from 2011

Hi,

I will try this solution later today and provide an update. thanks @Raido_Rattameister

  • 2322 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!