01-23-2022 12:58 AM
Dears,
i create IPsec tunnel and add four subnet to it all subnet work good and see the other side but only one subnet not work when i look for show route found its route not active as attached the last subnet172.16.17.0/24 can any one help me
01-23-2022 03:17 AM
Thank you for the post @mhmad_91
could you confirm that ipsec tunnel that is using interface tunnel.15 is up? If the tunnel is not up, then associated tunnel interface is down that will result static route using that interface not to be active.
Kind Regards
Pavel
01-23-2022 03:21 AM
the tunnel is up and their is 2 other subnet are working fine
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
