Static route path monitoring

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Static route path monitoring

L0 Member

After enabling path monitoring, firewall making that path as inactive even though ping is working 

1 REPLY 1

Cyber Elite
Cyber Elite

Thank you for the post @v-zuahma

 

since you mentioned that ping is working, have you used the same source IP address that Firewall is using in Path monitoring to confirm that destination is reachable?

ping source <Source IP address> host <Destination IP address>

 

Also, could you check the log from CLI:  less mp-log routed.log

Then look for log entries starting with: "MON: status update"

These logs will give you more details.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!