static route not active

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

static route not active

L0 Member

Dears,

i create IPsec tunnel and add four subnet to it all subnet work good and see the other side but only one subnet not work when i look for show route found its route not active as attached the last subnet172.16.17.0/24 can any one help me

notactive.JPG

2 REPLIES 2

Cyber Elite
Cyber Elite

Thank you for the post @mhmad_91

 

could you confirm that ipsec tunnel that is using interface tunnel.15 is up? If the tunnel is not up, then associated tunnel interface is down that will result static route using that interface not to be active.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

@PavelK 

the tunnel is up and their is 2 other subnet are working fine

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!