Static Route Removal

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Static Route Removal

L2 Linker

Default route via ISP-A (primary) has not yet recovered, even though the monitored IP address (DNS server of ISP-A) is already rechable via the interface connected to ISP-A router. (tested via ping source x.x.x.x host y.y.y.y)

 

I have seen the logs from previous months that the firewall has detected path failure and was able to recover. So I assume the setup is correct?

Any other troubleshooting that I can do? Or any other things to double check on my setup?

15 REPLIES 15

@theonewhoknocks

So on the interface that connects directly to ISP-A has a failure on pinging the DNS server.

If you trace from the interface connected to ISP-A to the DNS server, where does it fail?

 

Do you have a requirement to use separate VRs for this configuration?

  • 7494 Views
  • 15 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!