Status Incomplete

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Status Incomplete

L1 Bithead

Hello,

what does this mean and how to solve it?

When doing an show arp all:

Davevanwijck_0-1606816998706.png

No MAC is displayed at an IP address.

 

Any help is welcome, thanks in advance 🙂

 

 

6 REPLIES 6

Yes, that is what I thought as well. But why isn't the table being refreshed automatic after a certain time?

I would expect that this entry would be deleted after the TTL?

 

(The device is still connected, but the MAC address is gone. Maybe device is defect, but not sure yet.

We are busy with further troubleshooting.)

 

Is it possible that there are devices that are still attempting to reach out to the device?

Have you removed the device IP from any virtual router configurations (if that was a next hop)

 

As long as devices on the network are attempting to communicate to or through the device, then the FW may continue to show.

 

You can always do a "clear arp all" to clear the table.

Help the community: Like helpful comments and mark solutions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!