Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
05-18-2020 08:08 AM
Our PAs were recently setup by a now former contractor and all templates appear to be the same. However, while our new contractor is able to access all of the internal FWs, he is not able to access our edge FW. Any ideas?
05-18-2020 08:36 AM - edited 05-18-2020 08:38 AM
This could be due to a lot of factors and u don’t mention much in your post.
- Is it permission based (can they at least reach the login page)?
- And from where is the new contractor trying to access the edge FW? Some security policy could be blocking that new and unknown object (try checking that as well)
- I wouldn’t think the previous contractor altered any management interface profiles. But give that a peak as well and make sure relevant services are enabled.
Ps. I’m assuming network reachability has been tested and is not the issue in the above.
Please revert back and let us know how it went 😄
Regards
John.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
