Superuser cannot access Edge FW

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Superuser cannot access Edge FW

L2 Linker

Our PAs were recently setup by a now former contractor and all templates appear to be the same.  However, while our new contractor is able to access all of the internal FWs, he is not able to access our edge FW.  Any ideas?

1 REPLY 1

L1 Bithead

Hi @amy.hazelwood 

This could be due to a lot of factors and u don’t mention much in your post.

 

- Is it permission based (can they at least reach the login page)?

- And from where is the new contractor trying to access the edge FW? Some security policy could be blocking that new and unknown object (try checking that as well)

- I wouldn’t think the previous contractor altered any management interface profiles. But give that a peak as well and make sure relevant services are enabled.

 

Ps. I’m assuming network reachability has been tested and is not the issue in the above.

 

Please revert back and let us know how it went 😄

 

Regards

John.

  • 1589 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!