Switch port interface

infotech · ‎11-01-2013

Is it possbile to configure one of the ethernet interface ports on a PA 3020 as a switch port?

goku123 · ‎11-01-2013

Configuring interfaces as mode "Layer2/L2", should make them behave as layer2 switch interfaces.

infotech · ‎11-01-2013

so its as easy as going to the network tab\interfaces selecting ethernet1/1 and changing the interface type to layer2 and clicking okay

HULK · ‎11-01-2013

Yes you are correct. Also you can tag that interface too.

Thanks

mbutt · ‎11-01-2013

The following doc explains how PA can be used in different Layer 2 scenarios

Hope this helps you with the configuration,

Thanks

Numan

infotech · ‎11-04-2013

So what about trying to configure the PA to match up with ports on the ASA 5505 as shown here

interface Ethernet0/2

switchport trunk allowed vlan 1,999

switchport trunk native vlan 1

switchport mode trunk

!

interface Ethernet0/3

switchport trunk allowed vlan 1,999

switchport trunk native vlan 1

switchport mode trunk