07-31-2012 10:29 AM
Is it possible to traffic capture on the management interface ? If so how is it done ?
07-31-2012 01:34 PM
We cannot capture the traffic directly on the management interface but there is a way to capture the management traffic on the device using "service routes" . Service routes are used to send/receive the management traffic of the device from one of the dataplane interfaces instead of the mgmt interface. You configure this option from the device-->setup-->services-->service configuration. Once you do this, the mgmt traffic will take the path of the configured interface rather than the mgmt interface. Now you can capture this interface for analyzing the mgmt traffic.
07-31-2012 01:34 PM
We cannot capture the traffic directly on the management interface but there is a way to capture the management traffic on the device using "service routes" . Service routes are used to send/receive the management traffic of the device from one of the dataplane interfaces instead of the mgmt interface. You configure this option from the device-->setup-->services-->service configuration. Once you do this, the mgmt traffic will take the path of the configured interface rather than the mgmt interface. Now you can capture this interface for analyzing the mgmt traffic.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
