Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
01-23-2017 04:07 PM - edited 01-23-2017 04:07 PM
Hi All,
Panorama server (IP: 10.10.10.5) is not able to manage a firewall that was recently deployed.
which two of the following Toubleshoot commands can be used in CLI of the new firewall ?
A. > test panorama-connect 10.10.10.5
B. > show panorama-status
C. > show arp all | match 10.10.10.5
D. > tcpdump filter “host 10.10.10.5”
E. > debug dataplane packet-diag set capture on
Please advice.
01-23-2017 04:59 PM - edited 01-23-2017 11:37 PM
Easy to verify:
> show panorama-status
If it is management interface then tcp dump is a valid command:
> tcpdump filter “host 10.10.10.5”
P.S get VM install and learn that way
01-23-2017 07:03 PM
Thnaks for the reply
@TranceforLife wrote:Easy to verify:
> show panorama-status
If it is management interface then tcp dump is a valid command:
> tcpdump filter “host 10.10.10.5”
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
