02-16-2021 11:30 AM
I am pretty new to Palo Alto, wanted to check if the an aggregated port in PA can be assigned with 2 IP addresses from same subnet, say 22.214.171.124/29 and 126.96.36.199/29. The Idea is the ethernet interfaces 1 & 2 that are be bonded to ae will be connected to the two core switches (port 1 to switch 1 and port 2 to switch 2). After configuring the AE, I wanted to build a BGP relationship between PA and switches using the two AE IPs.
Would this be possible?
02-16-2021 08:26 PM
You can only have a single IP address assigned to any given interface (an AE is logically one interface) or sub interface. I guess if you wanted to you could configure two sub interfaces on your AE interface and setup BGP peering on both links, but I struggle to see the advantage of doing so.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!