07-08-2016 03:59 AM
Hi,
We have setup Palo Alto Firewall version 7.0 virtual appliance. we have configured two networks ehernet1/1 (10.10.2.x/24) and ethernet1/2(10.10.3.x/24). We have created a policy to allow traffic between these two networks and are able to ping across the firewall and do data transfer between two machines however we do not see any trafffic under 'MONITOR' tab in 'Traffic' section.
We are able to see traffic in MONITOR--> App Scope--> Network Monitor.
Is it necessary to apply Auth code under license for us to see the traffic? my understanding is that it can show upto 200 sessions without the auth code.
Please help urgently.
many thanks,
Vijay
07-08-2016 05:09 AM
HI Vijay
The virtual firewall will allow up to 200 active sessions without licences, but will not produce log files for these until a valid support license is installed
07-08-2016 05:09 AM
HI Vijay
The virtual firewall will allow up to 200 active sessions without licences, but will not produce log files for these until a valid support license is installed
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
