02-07-2022 12:07 PM - edited 02-07-2022 12:22 PM
We're upgrading a VPN tunnel to IKEv2 between a Cisco FTD 2140 and a PA-850 running 9.1. What I've noticed is that the PA doesn't have an option for PRF on phase 1. Does the PA automatically make this the same as the integrity algorithm? Is there some other way to configure this?
Thank you.
02-08-2022 09:57 AM
FWIW, PRF was set to SHA256 on the Cisco FTD, and the tunnel negotiated with no problems. It was IKEv1 previously, so the transition went smoothly. Steve, thanks for your input.
02-08-2022 07:51 AM
From a simplicity perspective, the PRF is done internally within the PANW.
When creating the actual tunnel (IPSec tunnel menu item on the PANW), you can choose Manual Key, vs Auto Key
02-08-2022 09:57 AM
FWIW, PRF was set to SHA256 on the Cisco FTD, and the tunnel negotiated with no problems. It was IKEv1 previously, so the transition went smoothly. Steve, thanks for your input.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
