USER ID agent wmi probing

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

USER ID agent wmi probing

L4 Transporter

Hi

something strange with old version of user-id agent version 4.1.6-5

the user is connected on the network lan with wire  and is authenticated on the active directory the result is the user is identicated in the traffic log

If the user switch from wire connection to wifi connection the wmi probing should detect the new ip affected to user? or not?

the switching is ok if the user disconnect his windows session and reopen is windows session and now the user is well identicated in the palo. du to the modifiation of AD security log

the wmi probing seem to not working.

thank

1 accepted solution

Accepted Solutions

an answer from the support

When the IP changes but the user is same, WMI probe will kick in. When the firewall receives traffic on an interface in a zone with User Identification enabled that is from an IP address that has no user data associated with it, the firewall will send the IP to all the AD agents configured and ask them to probe it to determine the user. This request will be added to the queue along with the known IP addresses waiting to be polled. If the Agent is able to determine the user at the IP based on the probe the information will be sent back to the firewall

View solution in original post

5 REPLIES 5

L4 Transporter

the account affected to the user id agent have just limit right to pol the security log on the AD.

and I will try with an account like an admin account to be allow to probe CIMV2 namespace on the client operating system

L4 Transporter

I changed the user affected to the user id agent service, but it doesn't  change, wmi probing seems to not working

any idea?

L7 Applicator

Hello Sir,

It depends on the WMI probing interval that you have set in the UI Agent. If the user switch from wire connection to wifi connection the wmi probing should detect the new ip , but it would happen after a certain interval. Please go through below mentioned KB article for the same.

User-ID Agent Setup Tips

Hope this helps.

Thanks

but what is the behavour of the firewall if a new ip appear in the traffic log.

a probing action  is triggered or not?

an answer from the support

When the IP changes but the user is same, WMI probe will kick in. When the firewall receives traffic on an interface in a zone with User Identification enabled that is from an IP address that has no user data associated with it, the firewall will send the IP to all the AD agents configured and ask them to probe it to determine the user. This request will be added to the queue along with the known IP addresses waiting to be polled. If the Agent is able to determine the user at the IP based on the probe the information will be sent back to the firewall

  • 1 accepted solution
  • 6445 Views
  • 5 replies
  • 1 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!