UserID Monitored server (WinRM-HTTP) gets Kerberos error.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

UserID Monitored server (WinRM-HTTP) gets Kerberos error.

L4 Transporter

Hi,

We tried this: https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-admin/user-id/map-ip-addresses-to-users/configur...

It seems like config is OK but we are getting "kerberos error" in status ofr this server monitored. Where can we see whats happening about this error? useridd logs doesnt show anythimng.

6 REPLIES 6

L2 Linker

I recently changed to  WinRM-HTTP and I am seeing the same thing.  From the cli if I look at the log, I can see that I have an error "KDC has no support for encryption type.

 

The error is at the end of the log when you use Shift-G after entering less mp-log useridd.log from the cli.

 

I am not sure why I am getting this error, and trying to figure it out.

For the service account I am using, I have turned on the option to use aes128-cts-hmac-sha1-96, but I am still getting the error.

 

The DC is a Windows 2012R2 server.

 

 

Cyber Elite
Cyber Elite

@BigPalo,

As @sgoethals mentioned you should check the useridd.log file to check for errors, and you can also build out an authentication-profile with your Kerberos profile so that you can test authentication to ensure that it's setup properly. I'd also just check with your server team that they've enabled it on their end, as this is usually restricted during standard hardening standards. 

L2 Linker

After spending quite a bit of time on this, I determined a resolution to my issue.

 

The newer encryption methods that use AES are supported in 2012R2.  This is the OS, that I am using on the domain controllers (for just a little longer), however, the functional level of the domain was set to 2008.  Once I updated the functional level, the Kerberos error went away and an "access denied" error showed up.  The is happened  because I had not made the service account a member of the Windows Group Remote Management.

 

Once I made the service account a member of this group the error went away, and I was able to connect via WinRM-HTTP.

 

Good luck on your resolution.

We check the useridd logs an we only see this kind of events:

 

2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=249, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-390c0b0affff0000, new_cp=7, new_uid=380, old_cp=7, old_uid=636, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=251, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=1542, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=248, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=672, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-390c0b0affff0000, new_cp=7, new_uid=472, old_cp=7, old_uid=636, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-390c0b0affff0000, new_cp=7, new_uid=257, old_cp=7, old_uid=636, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=476, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=255, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=90, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.610 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=410, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.611 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=933, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.611 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=258, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.611 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=933, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.611 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-390c0b0affff0000, new_cp=7, new_uid=257, old_cp=7, old_uid=636, gp_user=0
2022-07-08 09:04:39.611 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=416, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.611 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=246, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:39.611 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-390c0b0affff0000, new_cp=7, new_uid=472, old_cp=7, old_uid=636, gp_user=0
2022-07-08 09:04:39.611 +0200 ignore the user logged in at the same time: ts=1657263879, ip=0-1e0c0b0affff0000, new_cp=7, new_uid=249, old_cp=7, old_uid=250, gp_user=0
2022-07-08 09:04:50.333 +0200 ignore the user logged in at the same time: ts=1657263866, ip=0-900c010affff0000, new_cp=7, new_uid=385, old_cp=7, old_uid=555, gp_user=0
2022-07-08 09:04:55.581 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-920c010affff0000, new_cp=7, new_uid=548, old_cp=7, old_uid=545, gp_user=0
2022-07-08 09:04:55.581 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-920c010affff0000, new_cp=7, new_uid=1516, old_cp=7, old_uid=545, gp_user=0
2022-07-08 09:04:55.581 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-900c010affff0000, new_cp=7, new_uid=198, old_cp=7, old_uid=507, gp_user=0
2022-07-08 09:04:55.582 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-920c010affff0000, new_cp=7, new_uid=546, old_cp=7, old_uid=545, gp_user=0
2022-07-08 09:04:55.582 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-920c010affff0000, new_cp=7, new_uid=204, old_cp=7, old_uid=545, gp_user=0
2022-07-08 09:04:55.582 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-a90c010affff0000, new_cp=7, new_uid=547, old_cp=7, old_uid=189, gp_user=0
2022-07-08 09:04:55.582 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-920c010affff0000, new_cp=7, new_uid=551, old_cp=7, old_uid=545, gp_user=0
2022-07-08 09:04:55.582 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-900c010affff0000, new_cp=7, new_uid=447, old_cp=7, old_uid=507, gp_user=0
2022-07-08 09:04:55.582 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-900c010affff0000, new_cp=7, new_uid=385, old_cp=7, old_uid=507, gp_user=0
2022-07-08 09:04:55.582 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-9d0c010affff0000, new_cp=7, new_uid=553, old_cp=7, old_uid=492, gp_user=0
2022-07-08 09:04:55.582 +0200 ignore the user logged in at the same time: ts=1657263895, ip=0-9d0c010affff0000, new_cp=7, new_uid=669, old_cp=7, old_uid=492, gp_user=0

 

----------------

where we can see the "kerberos error" showed in monitored server useridd?

 

L4 Transporter

Hi Team,

 

Have you resolved this issue ?, I am having same issue and I am getting error in server 2016. 

Snow

L2 Linker

Sometimes enabling AES128 and AES256 encryption on the service account in active directory isn't enough. You also must reset the password of the service account. You can have a look at my post.

  • 20205 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!