using Subinterfaces in different Vsys inder same phy interfa

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

using Subinterfaces in different Vsys inder same phy interfa

L1 Bithead

Hello Team,

 

We are implementing a physical interface under vsys Data-center , with subinterface (Eth1/200 --> Data-center) and other subinterface (Eth1/300--DeptA) is assigned to other vsys called DeptA. knowing that the physical interface is without zone . How does the communication will be authorized in the security policies and with the use of external Zones. does this scenario could be done or not logical behavour.

 

Thanks and need help for this point ASAP. before implementing in the infras of the customer.

 

#panorama #paloalto #intervsys #vsys

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Hello,

Each VSYS is its own virtual Palo Alto, so each VSYS will need security policies to allow the traffic.

https://docs.paloaltonetworks.com/pan-os/11-0/pan-os-admin/virtual-systems/virtual-systems-overview

 

Hope this helps.

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Hello,

Each VSYS is its own virtual Palo Alto, so each VSYS will need security policies to allow the traffic.

https://docs.paloaltonetworks.com/pan-os/11-0/pan-os-admin/virtual-systems/virtual-systems-overview

 

Hope this helps.

  • 1 accepted solution
  • 154 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!